phone Phone
+622129020352
close
menu

PT Nalpreme Technochem

sql
Flobond
Hover to Zoom

Sell Flobond



Specification of Flobond

WHAT IS FLOBOND?
FLOBOND is a polymer-based soil conditioner (PAM). Flobond includes hydro-soluble anionic polymers, with high molecular weight.
"FLOBOND" can reduce soil erosion caused by water and wind effects, and increase permeability.
Formulations-[(CH2-CH) n-(CH2-CH) m]-
l l
C = O C = O
l l
O-K + Nh2
HOW IT WORKS FLOBOND?
FLOBOND binds the fine particles of soil which are prone to be carried away by the water on the surface (vulnerable to erosion)
When a polymer dissolved in water potassium ion dissociation leaves the negative zone in the molecule, where the colloidal particles of soil will improve (the ratio n/m varies from 0 to 100 and give anionicity to PAM).
FLOBOND + BINDER = FINELY GROUND PARTICLES (SOIL STABILITY)
EXCELLENCE FLOBOND
FLOBOND allows increased soil cohesion weak structured: a little sediment washed by water. The results: 95% average less erosion.
The porosity of the soil just preserved, it facilitated the infiltration of water very well (more than 35% in soil clays/slimy and over 50% in clay).
FLOBOND greatly reduces losses due to loss of nutrients (84% less for phosphate and nitrate) and pesticides (Atrazina, Triflularina, etc.).
FLOBOND increase the level of germination up to 35% for those who are susceptible to plant incrustration in the soil (for example bits and leguminosae).

USAGE Suggestions
POWDER PRODUCTS
Pour slowly into the irrigation water, kinda stirred to avoid particle binding.
Along with the increase in water temperature, faster product dissolves.
Product FLOBOND increase the viscosity of water. If there is a polymer that clings to the equipment, do not use water. in return, remove with a shovel or use of suction. Only once the powder had been separated and removed, spray parts to be cleaned with water.
EMULSION PRODUCTS
Enter the pressure to the system prior to injection.
This required a single injection system valve holder.
MORE INFORMATION
For previous cleanup equipment, compressed air into the insuflate bits of powder. Then spray with "hipo" (NaOCl) where the equipment will be used in the solution FLOBOND.
Avoid skin and eye contact (it is recommended to wear gloves and goggles or glasses).
It is also advisable to wear masks (breathing protector) indebted powder.
ENVIRONMENTAL IMPACT
Under UV light and attacks the FLOBOND microbiology, relegated in a natural way in the soil to form Amonnium of carbon dioxide, water and Nitrate Amonnium. Group nytrogen molecules quickly consumed by bacteria of soils. The carbon group is degraded by about 10-15% per year according to the intensity of UV rays action.
No toxicity was reported either in the air or on the ground. This product is approved by the US FDA and by the Department of
French health as additives for water treatment.
Product concentration in water is null 30 minutes after the end of the application.
The enduring effectiveness of FLOBOND in agriculture varies from four to eight weeks depending on the Agro-climatic conditions.
THE AIR-CONDITIONING AND STORAGE ATTENTION
FLOBOND products are available in different ways: Powder, Emulsion or Tablet. Cooling for each type are shown in the technical reports (see table next page).
Product FLOBOND should be stored in a dry place fresh (from 0 to 35 ºc).

Untuk keterangan lebih lanjut, silahkan download PDF ini :